Putties and Primersputties-and-primers
Polymer Putty ( gold Series )
Universal Primer ( Universal Series )
Water Proof Polymer Putty ( Polymer Series )
Single Pack Epoxy Primer ( Platinum Series )
Stain Block Primer ( Platinum Series )
Water Thinnable Sealer Primer ( Platinum Series )
Acrylic Wall Putty ( Gold Series )
Exterior Wall Primer ( Gold Series )
Polymer Putty ( Gold Series )
Redoxide Metal Primer ( Gold Series )
ST Wood Primer ( Gold Series )
Water Thinnable Cement Primer ( Gold Series )
Zinc Chromate Primer ( Gold Series )
Polymer Putty ( Silver Series )
Water Thinnable Cement Primer ( Silver Series )
Water Thinnable Cement Primer ( Bronze Series )
Available Pack sizes: 5, 20 and 40 kg
Polymer Putty Gold Series
This is a specially designed product based on white cement, redispersable polymer and functional additives, to give a smooth finish to rough exterior plasters. It can be used on interior as well as exterior surfaces like cement plasters, asbestos sheets, concrete, and brickwork.
Advantages
- Easy to use
- Good adhesion and compressive strength
- Non-flammable
- No added lead, mercury or chromium compounds
Technical Data Sheet
TVC
Surface preparation & application
- Clean surface of loose paint, dust and grease by sanding with emery paper. Wipe clean with a soft cloth.
- For newly plastered surfaces, allow for 3 months curing before painting. Then sprinkle the surface with water.
- Apply one coat of Indigo Polymer Putty with a putty blade after mixing with 30-35% water by weight. Allow to dry for 4-5 hours.
- If required gently rub the surface with abrasive paper grit no 500 or higher, or use putty blade to gently remove loose particles.
- Apply second coat of Indigo Polymer Putty and allow to dry for 10-12 hours. (The applied putty should be 1.5 mm thick or less.)
Readymade Colour Combinations
[contact-form-7 404 "Not Found"]